MakerVault Wiki – Bambu Studio

1. Getting Started

Open Bambu Studio and make sure you’re logged into the MAMCMakerVault account.

  • The Dashboard: The software is divided into three main tabs: Prepare (setup), Preview (inspection), and Device (monitoring).
  • Connecting: Go to the Device tab and ensure your assigned printer (e.g., “A-1 MIni MakerVault”) is connected via Wi-Fi.

2. Setup: Printer & Filament

In the Prepare tab, look at the left-hand sidebar to set your hardware “rules”.

  • Printer: Select your specific machine (e.g., Bambu Lab X1 Carbon 0.4 nozzle).
  • Plate Type: Most of our printers use the Textured PEI Plate.
  • Filament: Click the drop-down and select Generic PLA or Bambu PLA Basic.

3. Prepare: Importing & Adjusting

  • Import: Drag your .STL, .3MF or .STEP file directly onto the virtual build plate.
  • Positioning: Use the Move (M), Rotate (R), and Scale (S) tools in the top toolbar to adjust your model.
  • Orientation: Always use the Lay on Face tool to ensure the Benchy’s hull is flat against the bed for proper adhesion.

4. Slice & Preview

Once the model is centered, click the green Slice Plate button in the top right.

  • Inspection: Use the vertical Layer Slider to scroll through the print from bottom to top.
  • What to look for: Ensure the first layer is solid and that there are no “floating islands” (parts printing in mid-air).
  • Stats: Check the top-right legend for the estimated print time and filament usage.

5. Sending the Print

Click Print Plate. A pop-up window will appear:

  1. Verify the correct printer is selected.
  2. Ensure Bed Leveling is checked.
  3. Hit Send.

The printer will now take over. You can monitor the progress and the live camera feed from the Device tab.

Helpful Resources